Absolutely. Our screw feeder model is specifically designed for such applications. We customize the screw and test your actual material to ensure smooth, consistent feeding.

Yes. Our systems can store up to 100 preset programs, allowing you to switch between different product recipes quickly and easily from the control panel

Our design is simple, stable, and low-cost to maintain.
We don’t force expensive spare parts sales.
And unlike others, our PCB boards are backward-compatible, meaning no chaos managing different versions. You only need 1–2 backup boards—not a pile of SKU-matched chips.

We offer real remote support—you’ll get help even during testing, not just post-sale.
We guide you via video, parameter setup, and fault checks. If needed, we’ll repair your board rather than upsell a new one.

The frequency of calibration of combinatin scale depends on many factors, such as the accuracy of scale and accuracy your need, the environment and frequency of use, etc. In general, it is recommended that calibration scale be calibrated at least once a week. The weight of the calibration scale used also varies depending on the weighing need. The commonly used weight is 1KG. But for higher precision requirements ,calibration weighers of 100g or 300g should be used .

In addition, if you find that target weigh is different to your expectations when you use the combination scale, you should also calibrate it as soon as possible, and check whether the weighing hopper is operating normally and whether there is any material jam.

Combination scales are usually placed at the end of the production system to weigh and package the products that have been produced. It is usually placed above the weighing system or packaging system, that is, above the conveyor belt, vibrating feeder and packaging machine. At the same time, Generally, in order to ensure its stability, it will be installed on a solid working platform to avoid shaking and swaying from affecting its accuracy. In addition, in order to have better accuracy, avoid the influence of environments, such as wind and other equipment intervention .

When an unsatisfactory weight is detected, the scale will display an error message . This is to let the operator find the error in time, and immediately take out the incorrectly weighed material, so that the scale can continue to operate normally.

Add a collection hopper on the scale body can make this process automatic. It will be automatically discharged unqualified products from the other side of the collecting hopper,  there is no need for the operator to solve it.

At the same time, frequent overweight will cause damage to load cell, and may lead to repair or replacement of load cell, so you should read the manual carefully before running the weighers . communicate with us in time if you have any problems during use.

Load cells are one of the most important components in combination scales. They are used to measure the weight or force of an object. They work on the principle that when an object is subjected to an external force, the material inside the object undergoes deformation, which converts the weight or force of the object into an electrical signal. By measuring these electrical signals, the weight or force of the object can be determined.

A load cell is a precision measuring parts that requires regular maintenance to maintain its accuracy and reliability, and to protect against shock ,vibration and overload

1.”Clean ” &”Zero ” all the buckets very times when start machines

2.Don’t push a large pressure on weigh buckets and load cell

3.Do switch offf the power supply when maintaining or cleaing machine .

4.Make sure machines fastern and stable .