{"id":11896,"date":"2026-01-08T09:30:02","date_gmt":"2026-01-08T09:30:02","guid":{"rendered":"https:\/\/fill-package.com\/?p=11896"},"modified":"2026-04-03T08:02:21","modified_gmt":"2026-04-03T08:02:21","slug":"sticky-material-packaging-multihead-weigher-screw-feeder-solution","status":"publish","type":"post","link":"https:\/\/fill-package.com\/es\/how-to-handle-sticky-and-difficult-to-flow-products-with-a-multihead-weigher\/","title":{"rendered":"Solving the \u201cSticky\u201d Problem: Why Your Packaging Line Clogs \u2014 and How to Fix It for Good"},"content":{"rendered":"

Are You Running Automation \u2014 or ‘Human-Assisted Automation’?<\/b><\/strong><\/h2>\n

Here is a question worth asking honestly:<\/p>\n

 <\/p>\n\n\n\n
\ud83e\udd14 \u00a0The Uncomfortable Reality<\/b><\/strong><\/p>\n

Do you have a multihead weigher on your line \u2014 but also two workers standing beside it, constantly pushing product with their hands to keep it moving? If yes, you don’t have automation. You have a very expensive machine that requires permanent human intervention. That’s called ‘human-assisted automation,’ and it’s costing you more than manual weighing ever did.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

For dry products \u2014 nuts, chips, frozen peas \u2014 a standard multihead weigher is a genuine workhorse. But for kimchi (\u6ce1\u83dc)<\/b><\/strong>, oily snacks<\/b><\/strong>, sauce-rich ready meals<\/b><\/strong>, or wet pet food<\/b><\/strong>, the standard vibration-based design doesn’t weigh your product. It collects it into a paste and periodically drops a mass of indeterminate weight into your bag.<\/p>\n

 <\/p>\n

This guide explains the physics of why this happens, which specific product categories are most affected, and the engineering components that solve it \u2014 permanently.<\/p>\n

 <\/p>\n

 <\/p>\n

Why Does Product ‘Bridge’? The Physics of Sticky Material Failure<\/b><\/strong><\/h2>\n

A standard multihead weigher moves product through one mechanism only: vibration. A vibrating top cone distributes product outward. Vibrating linear feeder pans carry it to weigh hoppers. The entire system assumes one thing \u2014 that your product will slide when shaken.<\/p>\n

 <\/p>\n

Two failure modes that defeat vibration:<\/b><\/strong><\/h3>\n
    \n
  1. Surface Tension & Lipid Adhesion: \u00a0<\/b><\/strong>Marinated meat, kimchi, and oily snacks all have high lipid or brine content on their surface. This creates a thin adhesion layer between the product and the stainless steel pan surface. At low vibration amplitudes, this bond is stronger than the shaking force. The product sits still. Increase amplitude \u2014 and the product bounces chaotically, flying past hoppers rather than into them.<\/li>\n<\/ol>\n

     <\/p>\n

      \n
    1. Bridging (\u642d\u6865\u6548\u5e94): \u00a0<\/b><\/strong>Irregular-shaped pieces \u2014 shrimp, kimchi strands, bone-in chicken \u2014 interlock mechanically across the tray opening. One piece sticks; the mass behind it stops. On dry product, the next vibration cycle breaks the bridge. On sticky product, the bridge holds indefinitely. The hopper starves. The machine’s combination logic runs with empty or half-full buckets, producing weights that are either far under or unpredictably over target.<\/li>\n<\/ol>\n

       <\/p>\n\n\n\n
      \ud83d\udcca \u00a0The Cost of Bridging in Numbers<\/b><\/strong><\/p>\n

      A 14-head weigher targeting 500g packs at 60 bags\/min. If 3 out of 14 hoppers are regularly starved due to bridging, effective throughput drops to ~47 bags\/min. That’s 780 bags\/hour lost. At 10 hours\/shift, you’re giving up 7,800 packs \u2014 before counting rework from inaccurate weights.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

       <\/p>\n

      The golden rule of automated weighing<\/b><\/strong>: if you cannot control the feeding, you cannot guarantee the accuracy.<\/i><\/em>\u00a0Accuracy is not won at the weighing stage. It is won or lost at the feeding stage. This is why the only engineering solution for sticky materials is not ‘better vibration’ \u2014 it is the complete elimination of vibration from the feeding pathway, replaced by Forced Mechanical Displacement.<\/b><\/strong><\/p>\n

      \"Custom<\/p>\n

       <\/p>\n

       <\/p>\n

      Three Industries Where Standard Weighers Fail \u2014 and Screw Feeders Win<\/b><\/strong><\/h2>\n

      These aren’t edge cases. They’re among the fastest-growing food categories globally. Each one has a specific failure mode on standard equipment:<\/p>\n

       <\/p>\n\n\n\n\n\n\n
      Product \/ Industry<\/b><\/strong><\/td>\nSpecific Failure Mode on Standard Weigher<\/b><\/strong><\/td>\nHow Screw Feeder Solves It<\/b><\/strong><\/td>\n<\/tr>\n
      \ud83e\udd6cKimchi& Pickled Vegetables<\/a><\/b><\/strong><\/td>\nHigh salt + high water content. Brine coats every surface. On a vibrating pan, the liquid pools, the vegetable strands mat together, and the entire mass refuses to move. Salt also accelerates corrosion on non-coated stainless steel, destroying equipment over 6\u201312 months.<\/td>\nScrew channels push brine-soaked strands forward regardless of mat weight. U-shaped troughs prevent strand tangling. Brine drains away from the weighing zone.<\/td>\n<\/tr>\n
      \ud83c\udf56 \u00a0Chinese Ready-Meal Meat (Sauce-Rich)<\/a><\/b><\/strong><\/td>\nBraised pork belly, spicy beef cubes, mapo tofu protein \u2014 all arrive pre-coated in thick sauce. At high-speed operation (60 bags\/min), sauce creates vacuum adhesion between product and hopper wall. Each gram that sticks is a gram your sensor doesn’t count.<\/td>\nScraper hoppers (double-door design) physically wipe the hopper wall at every cycle. Zero residue. Teflon-coated chutes further eliminate adhesion zones. Memory hoppers compensate for sauce weight variation.<\/td>\n<\/tr>\n
      \ud83d\udc3e \u00a0Oily Pet Treats & Chews<\/b><\/strong><\/td>\nLiver treats, fish skins, meat jerky \u2014 high lipid content. In cold environments (under 15\u00b0C), fats partially solidify, causing pieces to fuse into clumps 3\u20135x the target weight. Vibration cannot break these clumps; it compresses them further.<\/td>\nForced screw rotation physically separates clumps during transport. U-shaped trough geometry limits clump size entering hoppers. Combination logic detects anomalous hopper weights and waits for a clean cycle.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

       <\/p>\n

      Internal Link: For a deeper technical comparison of standard vibration weighers vs. screw feeder systems, see our guide: <\/b><\/strong>Standard Multihead Weigher vs. Screw Feeder: Which is Best for Sticky Meat?<\/u><\/a><\/p>\n

       <\/p>\n

       <\/p>\n

      The Engineering Solution: Screw Feeder Multihead Weigher with Scraper Hoppers<\/b><\/strong><\/h2>\n

      The screw feeder multihead weigher doesn’t attempt to improve vibration \u2014 it replaces it entirely. Product is driven forward by a rotating helical screw auger<\/b><\/strong>\u00a0inside a U-shaped trough<\/b><\/strong>. No bouncing. No hoping the product will slide. Physical, controlled, repeatable displacement on every cycle.<\/p>\n

       <\/p>\n

      Here are the core engineering components and why each one matters for sticky material applications specifically:<\/p>\n

       <\/p>\n\n\n\n\n\n\n\n\n\n
      Component<\/b><\/strong><\/td>\nEngineering Detail<\/b><\/strong><\/td>\nBest For<\/b><\/strong><\/td>\n<\/tr>\n
      Rotating Screw Feeder (Auger Drive)<\/b><\/strong><\/td>\nStainless helical screw sits in a U-shaped trough beneath the product. Motor-driven rotation physically propels material forward at a controlled rate \u2014 overcoming surface tension, fat adhesion, and brine pooling. Speed is independently adjustable per channel.<\/td>\nKimchi strands, marinated meat cubes, battered seafood<\/td>\n<\/tr>\n
      Double-Door Scraper Hoppers<\/b><\/strong><\/td>\nWhen the hopper door opens to release product, integrated scraper blades simultaneously sweep the interior walls. Every milligram is forced out. No adhesion buildup between cycles. Critical for sauce-rich or high-fat materials where even 2g residue per hopper distorts combination accuracy.<\/td>\nBraised meat, honey-glazed snacks, wet pet food<\/td>\n<\/tr>\n
      Teflon (PTFE) Coating (Optional)<\/b><\/strong><\/td>\nApplied to all product-contact surfaces of chutes and hoppers. Reduces the coefficient of friction by ~60% versus bare stainless steel. Particularly effective for materials that adhere via surface tension rather than physical interlocking.<\/td>\nKimchi brine, oil-marinated products, sticky seasonings<\/td>\n<\/tr>\n
      U-Shaped Screw Troughs<\/b><\/strong><\/td>\nThe U-profile constrains product laterally during screw transport, preventing the auger from crushing irregular pieces (bone-in chicken, whole shrimp, pork knuckle) while still delivering consistent flow velocity. Trough surface is electropolished to Ra \u2264 0.8\u03bcm.<\/td>\nBone-in poultry, whole shrimp, irregular meat cuts<\/td>\n<\/tr>\n
      Memory Hoppers (Enhanced Combination Logic)<\/b><\/strong><\/td>\nThe CPU stores the weight of product currently in each hopper between cycles. For sticky materials where hopper fill weight varies \u00b15\u20138%, memory logic continuously recalculates optimal combinations \u2014 sustaining accuracy at high speed without requiring uniform feed.<\/td>\nAll sticky applications at > 40 bags\/min<\/td>\n<\/tr>\n
      IP67 Washdown Construction<\/b><\/strong><\/td>\nEvery electrical enclosure, motor housing, and junction box is sealed to IP67 (full immersion protection). Facilities running kimchi or fresh meat lines pressure-wash equipment daily at 60\u201380\u00b0C. Standard IP54 equipment fails within months in this environment.<\/td>\nKimchi, fresh meat, seafood, ready-meal facilities<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

       <\/p>\n\n\n\n
      \ud83d\udcf7 \u00a0Visual Recommendation for Web Upload<\/b><\/strong><\/p>\n

      Insert a macro\/close-up photograph of the Double-Door Scraper Hopper here \u2014 showing the scraper blade in its open position against the hopper wall. Industrial buyers respond strongly to component-level detail that proves a real engineering solution to a real problem. Alt text: “Double-door scraper hopper detail \u2014 screw feeder multihead weigher for sticky products”<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

       <\/p>\n

       <\/p>\n

      What It Looks Like in Practice: Side-by-Side at 60 Bags\/Min<\/b><\/strong><\/h2>\n

       <\/p>\n\n\n\n
      \u274c \u00a0Standard Weigher \u2014 Kimchi Line<\/b><\/strong><\/p>\n

      07:00 \u2014 Line starts. Kimchi is loaded onto the vibrating top cone.<\/p>\n

      07:04 \u2014 Product begins bridging at tray exits. Hoppers 3, 7, 11 are starving.<\/p>\n

      07:09 \u2014 Worker A opens the guard and manually pushes the product. Food safety incident logged.<\/p>\n

      07:14 \u2014 Large clump drops into hopper 3. The machine produces a 340g bag against a 300g target. Rework.<\/p>\n

      07:23 \u2014 Line halts for hopper cleaning. 23 minutes of production lost.<\/p>\n

      End result: OEE ~58%. Manual labor still required. HACCP audit risk.<\/b><\/strong><\/td>\n

      		\u2705 \u00a0Screw Feeder Weigher \u2014 Same Kimchi Line<\/b><\/strong><\/p>\n

      07:00 \u2014 Line starts. Kimchi is loaded into the screw feed inlet.<\/p>\n

      07:00 onward \u2014 Auger rotates. Kimchi strands advance in a controlled, continuous flow.<\/p>\n

      07:00\u201317:00 \u2014 All 14 hoppers filling at a consistent rate. Combination logic cycles at 58 bags\/min.<\/p>\n

      Every hopper open cycle \u2014 scraper blades sweep walls. Zero residue accumulation.<\/p>\n

      End of shift \u2014 IP67 unit pressure-washed in 8 minutes. Line is ready for the next run.<\/p>\n

      End result: OEE 87\u201391%. Zero manual interventions. HACCP compliant.<\/b><\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

       <\/p>\n

       <\/p>\n

      Is a Screw Feeder Right for Your Product? A Quick Self-Assessment<\/b><\/strong><\/h2>\n

      You need a screw feeder multihead weigher if any of the following apply:<\/p>\n

       <\/p>\n